Canon 15x or 18x IS Eyecup Right Side


This is the replacement eyecup for Canon 15x or 18x image stabilized binoculars. The factory uses silicone to hold the eyecup in place. To remove old eyecup you'll have to use a razor blade to cut the old one off and remove all of the silicone from the holder. After you have done this you'll have to put silicone on the inside of the eyecup and set it. Make sure that it is seated properly in the bottom edges are tucked under the main body. With Q-Tip and some rubbing alcohol remove any of the overflow from the top and bottom. Please look at the old eyecup and look how it is placed in its holder before you attempt this. Since this is our right side that allows you to adjust your right eye you will see the line on the eyecup adjust the line of the eyecup to match the center line on the binocular. If you have any questions on how to do this please do not hesitate to e-mail or call our repair department.

Add to Cart:

  • Model: YA7-1040-000
  • Shipping Weight: 0.5lbs

This product was added to our catalog on Tuesday 12 December, 2006.