There are no products in your cart. Perhaps the item you chose is sold out.
Canon 10x30 IS Eyecup Set Left & Right Side
This is the replacement eyecup for the Canon 10x30IS image stabilized binoculars. The factory uses silicone to hold the eye cup in place. To remove old eye cup you'll have to use a razor blade to cut the old one off and remove all of the silicone from the holder. After you have done this you'll have to put silicone on the inside of the eye cup and set it. Make sure that it is seated properly in the bottom edges are tucked under the main body. With Q-Tip and some rubbing alcohol remove any of the overflow from the top and bottom. Please look at the old eye cup and look how it is placed in its holder before you attempt this. Since this is our right side that allows you to adjust your right eye you will see the line on the eye cup adjust the line of the eye cup to match the center line on the binocular. If you have any questions on how to do this please do not hesitate to e-mail us!
No specifications found
- Weight 170
- Size X 15
- Size Y 25
- Size Z 5